[国外标准] JIS Z 8500：2002 Ergonomics -- Basic human body measurements for technological design

1.58 MB2019-11-28

[国外标准] JIS Z 8462-4：2006 Capability of detection -- Part 4：Methodology for comparing the minimum detectable

540.26 KB2019-11-28

[国外标准] JIS Z 8462-3：2006 Capability of detection -- Part 3：Methodology for determination of the critical va

682.72 KB2019-11-28

[国外标准] JIS Z 8462-2：2003 Capability of detection -- Part 2：Methodology in the linear calibration case

923.72 KB2019-11-28

[国外标准] JIS Z 8462-1：2001 Capability of detection -- Part 1：Terms and definitions

340.24 KB2019-11-28

[国外标准] JIS Z 8461：2001 Linear calibration using reference materials

987.66 KB2019-11-28

[国外标准] JIS Z 8405-2008 多个实验室间比较的方法测定熟练度的统计方法

3.1 MB2019-11-28

[国外标准] JIS Z 8404-2-2008 测量不确定度第2部分：测量软件不确定性的评价重复测量

2.35 MB2019-11-28

[国外标准] JIS Z 8404-1：2006 Measurement uncertainty -- Part 1：Guidance for the use of repeatability, reproduci

1.79 MB2019-11-28

[国外标准] JIS Z 8403：1996 Quality characteristics of products -- General rules for determination of specific v

1.03 MB2019-11-28

[国外标准] JIS Z 8402-6：1999 Accuracy (trueness and precision) of measurement methods and results -- Part 6：Use

1.58 MB2019-11-28

[国外标准] JIS Z 8402-5：2002 Accuracy (trueness and precision) of measurement methods and results --.Part 5

6.09 MB2019-11-28

[国外标准] JIS Z 8402-4：1999 Accuracy (trueness and precision) of measurement methods and results -- Part 4：Bas

805.2 KB2019-11-28

[国外标准] JIS Z 8402-3：1999 Accuracy (trueness and precision) of measurement methods and results -- Part 3：Int

1027.15 KB2019-11-28

[国外标准] JIS Z 8402-1：1999 Accuracy (trueness and precision) of measurement methods and results -- Part 1：Gen

987.27 KB2019-11-28

[国外标准] JIS Z 8401：1999 Guide to the rounding of numbers

95.36 KB2019-11-28

[国外标准] JIS Z 8322：2003 Technical drawings -- General principles of presentation -- Basic conventions and ap

374.48 KB2019-11-28

[国外标准] JIS Z 8321：2000 Technical drawings -- General principles of presentation

350.9 KB2019-11-28

[国外标准] JIS Z 8318：1998 Technical drawings -- Tolerancing of linear and angular dimensions

114.89 KB2019-11-28

[国外标准] JIS Z 8317：1999 Technical drawings -- Dimensioning -- General principles, definitions, methods of ex

505.89 KB2019-11-28

[国外标准] JIS Z 8317-1：2008 Technical drawings -- Indications of dimensions and tolerances -- Part 1： General

1.04 MB2019-11-28

[国外标准] JIS Z 8316：1999 Technical drawings -- General principles of presentation

501.26 KB2019-11-28

[国外标准] JIS Z 8315-4：1999 Technical drawings -- Projection method -- Part 4：Central projection

825.36 KB2019-11-28

[国外标准] JIS Z 8315-3：1999 Technical drawings -- Projection method -- Part 3：Axonometric representations

231.81 KB2019-11-28

[国外标准] JIS Z 8315-2：1999 Technical drawings -- Projection methods -- Part 2：Orthographic representations

224.52 KB2019-11-28