国外标准列表

[国外标准] BS EN 4133-2009 Aerospace series — Bolts, normal hexagonal head, coarse tolerance normal

[国外标准] BS EN 4131-2009 Aerospace series — Bolts, normal hexagonal head, coarse tolerance normal

[国外标准] BS EN 4130-2009 Aerospace series — Bolts, normal hexagonal head, coarse tolerance normal shank, medi

[国外标准] BS EN 4129-2009 Aerospace series — Bolts, normal hexagonal head, coarse tolerance normal

[国外标准] BS EN 4128-2009 航空航天系列.镀铝镍基合金钢短螺纹粗公差标称杆标准六角头螺栓.等级1250MPa(室温)425℃

[国外标准] BS EN 4127-2009 航空航天系列.铝IVD涂层钛合金制短螺纹粗容差标称手柄标称六角头螺栓.等级1100 MPa(环境温度)425°C

[国外标准] BS EN 411-1995 Sanitary tapware. Waste fittings for sinks. General technical specifications

[国外标准] BS EN 410-1998 建筑玻璃.镶装玻璃发光特性和数和阳光辐射特性的测定

[国外标准] BS EN 409-2009 Timber structures — Test methods Determination of the yield moment of dowel type fast

[国外标准] BS EN 4078-2009 航空航天系列.MoS2润滑的耐热钢锁紧和自锁紧薄壁螺纹插入件.分类1100MPa(室温)315℃

[国外标准] BS EN 4074-2009 航空航天系列.铝IVD涂层钛合金中长螺纹紧公差标准柄六瓣凹槽盘头螺栓.等级1100 MPa(室温)425℃

[国外标准] BS EN 4073-2009 航空航天系列.镀铬的合金钢中等长度螺纹、粗公差标准柄六瓣凹槽平头螺钉.等级1100MPa(室温)235℃

[国外标准] BS EN 407-2004 Protective gloves against thermal risks

[国外标准] BS EN 407-1994 Protective gloves against thermal risks (heat and-or fire)

[国外标准] BS EN 405-2001﹢A1-2009 呼吸防护器.防气体或防气体和颗粒的阀滤式半面罩要求,试验和标记

[国外标准] BS EN 4020-2009 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Elbows 90 °, welded end

[国外标准] BS EN 40-7-2002 灯柱.纤维增强聚酯复合灯柱的要求

[国外标准] BS EN 40-6-2002 灯柱.铝灯柱的要求

[国外标准] BS EN 40-5-2002 灯柱.钢灯柱的要求

[国外标准] BS EN 40-4-2005 灯柱.钢筋混凝土和预应力混凝土灯柱的要求

[国外标准] BS EN 40-3-3-2003 灯柱.设计和检定.通过计算检定

[国外标准] BS EN 40-3-2-2000 灯柱.设计和验证.通过试验进行的验证

[国外标准] BS EN 40-3-1-2000 灯柱.设计和验证.特性负荷规范

[国外标准] BS EN 40-2-2004 灯柱.一般要求和尺寸

[国外标准] BS EN 40-1-1992 灯柱.第1部分定义和术语