国外标准列表

[国外标准] JIS K7201-2-2007 Plastics -- Determination of burning behaviour by oxygen index -- Part 2：Ambient-te

[国外标准] JIS K7201-1-1999 Plastics -- Determination of burning behaviour by oxygen index -- Part 1：Guidance

[国外标准] JIS K7200-1986 Standard reference test specimens for calibrating a laboratory light exposure apparat

[国外标准] JIS K7199-1999 Plastics -- Determination of the fluidity of plastics using capillary and slit-die rh

[国外标准] JIS K7197-1991 Testing method for linear thermal expansion coefficient of plastics by thermomechanic

[国外标准] JIS K7196-1991 Testing method for softening temperature of thermoplastics film and sheeting by therm

[国外标准] JIS K7195-1993 Testing method for heat sag of plastics

[国外标准] JIS K7194-1994 Testing method for resistivity of conductive plastics with a four-point probe array

[国外标准] JIS K7193-1999 塑料.用热风炉测定点燃温度

[国外标准] JIS K7192-1999 Plastics -- Ethylene-vinyl acetate copolymer (EVAC) thermoplastics -- Determination o

[国外标准] JIS K7191-3-2007 Plastics -- Determination of temperature of deflection under load -- Part 3：High-st

[国外标准] JIS K7191-2-2007 Plastics -- Determination of temperature of deflection under load -- Part 2：Plastic

[国外标准] JIS K7191-1-2007 Plastics -- Determination of temperature of deflection under load -- Part 1：General

[国外标准] JIS K7181-1994 Plastics -- Determination of compressive properties

[国外标准] JIS K7171-2008 Plastics-Determination of flexural properties

[国外标准] JIS K7171-1994 Plastics -- Determination of flexural properties

[国外标准] JIS K7170-2008 塑料.设计数据的采集和表示指南

[国外标准] JIS K7165-2008 塑料.抗拉性能测定.第5部分单向纤维增强塑料复合材料的试验条件

[国外标准] JIS K7164-2005 塑料.测定拉伸性能.第4部分各向同性和正交异性纤维增强塑料复合物的试验条件

[国外标准] JIS K7162-1994 塑料.拉伸特性的测定.第2部分铸模和挤压塑料的试验条件

[国外标准] JIS K7161-1994 Plastics -- Determination of tensile properties -- Part 1：General principles

[国外标准] JIS K7160-1996 Plastics -- Determination of tensile-impact strength

[国外标准] JIS K7154-2-2002 塑料.热固性粉末模塑复合物(PMCs)试样的注射模塑成形.第2部分小板材

[国外标准] JIS K7154-1-2002 塑料热固性粉末模塑复合物(PMCs)试样的注射模塑成形第1部分一般原则和多用途试样的模塑成形

[国外标准] JIS K7153-2008 Plastics-Determination of linear dimensions of test specimens