国外标准列表

[国外标准] JIS Z 4520：2007 Test procedures for germanium gamma-ray detectors

[国外标准] JIS Z 4504：2008 Evaluation of surface contamination Beta-emitters (maximum beta energy greater than

[国外标准] JIS Z 4504：1993 Evaluation of radioactive surface contamination

[国外标准] JIS Z 4501：1988 Testing method of lead equivalent for X-ray protective devices

[国外标准] JIS Z 4416：2005 Solid state nuclear track dosemeter for personal neutron monitoring

[国外标准] JIS Z 4401：2006 Planchets used in radiation measurement instruments

[国外标准] JIS Z 4341：2006 Neutron ambient dose equivalent (rate) meters

[国外标准] JIS Z 4340：2006 Installed monitors for the detection of radioactive contamination of laundry

[国外标准] JIS Z 4339：2004 Optically stimulated luminescence dosimetry systems

[国外标准] JIS Z 4338：2006 Hand and foot monitors and personnel surface contamination monitors for alfha and-or

[国外标准] JIS Z 4337：1997 Installed articles surface contamination monitoring assemblies for beta emitters

[国外标准] JIS Z 4336：1995 Radioactive iodine samplers

[国外标准] JIS Z 4335：1993 Film badge for in-door environmental monitoring

[国外标准] JIS Z 4335：1993 AMD 1：2001 Film badge for in-door environmental monitoring

[国外标准] JIS Z 4334：2005 Reference sources for the calibration of surface

[国外标准] JIS Z 4333：2006 Portable photon ambient dose equivalent rate meters for use in radiation protection

[国外标准] JIS Z 4332：2002 General requirements of personal dosemeters for X and gamma radiations

[国外标准] JIS Z 4330-2008 Monitors for gamma emitting radionuclides in water

[国外标准] JIS Z 4316：2006 Radioactive aerosol monitors

[国外标准] JIS Z 4316：1995 Radioactive dust monitors

[国外标准] JIS Z 4314：2002 Radiophotoluminescent glass dosemeter systems

[国外标准] JIS Z 4120-2008 Medical electrical equipment X-ray tube assemblies for medical diagnosis Characteris

[国外标准] JIS Z 4001-1999 Glossary of terms used in nuclear energy

[国外标准] JIS Z 3952：2005 Methods of measurement for gas concentration in welding environment

[国外标准] JIS Z 3950：2005 Methods of measurement for airborne dust concentration in welding environment