2003资源列表

[国外标准] DIN EN 10312-2003 European Standard EN 10312 2002 has the status of a DIN Standard.

[国外标准] SAE J609-2003 (R)mounting flanges and power take-off shafts for small engines

[国外标准] SAE J551-4-2003 Test Limits and Methods of Measurement of Radio Disturbance Characteristics of Ve

[国外标准] SAE J2609-2003 Multi-Dimensional Thermal Properties of Insulated Heat Shield Material Systems

[国外标准] SAE J2608-2003 Off Throttle Steering Capabilities of Personal Watercraft

[国外标准] SAE J2562-2003 Biaxial Wheel Fatigue Test

[国外标准] SAE J2413-2003 Protocol to Verify Performance of New Xenon Arc Test Apparatus

[国外标准] SAE J2392-2003 Categorization and Properties of SAE Cold Rolled Strip Steels

[国外标准] SAE J200-2003 Classification System for Rubber Materials

[国外标准] SAE J1752-3-2003 (R) Measurement of Radiated Emissions from Integrated CircuitsTEMWideband TEM (GTEM

[国外标准] SAE J1752-2-2003 (R) Measurement of Radiated Emissions from Integrated CircuitsSurface Scan Method (

[国外标准] SAE J1704-2003 硼酸醋型制动液

[国外标准] SAE J1493-2003 Shielding of Starter System Energization

[国外标准] SAE J133-2003 Fifth Wheel Kingpin Performance—Commercial Trailers and Semitrailers

[国外标准] SAE AS 5164A-2003 fitting, connector, multiple fluid pressure line, 45°

[国外标准] SAE ARP4191-2003 C Gas Turbine Engine Performance Presentation

[国外标准] SAE AMS 5966A-2003 Nickel Alloy, Corrosion and Heat Resistant, Welding Wire 50Ni - 20Cr - 20Co - 5.9

[国外标准] SAE AMS 5886B-2003 Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 50Ni - 20Cr - 20Co

[国外标准] SAE AMS 5699G-2003(R2007) Nickel Alloy, Corrosion and Heat-Resistant, Wire 72Ni 15.5Cr 0.95Cb 2.5Ti

[国外标准] SAE AMS 5698G-2003(R2007) Nickel Alloy, Corrosion and Heat-Resistant, Wire 72Ni - 15.5Cr - 0.95Cb -

[国外标准] SAE AMS 5643Q-2003 Steel, Corrosion-Resistant, Bars, Wire, Forgings, Tubing, and Rings 16Cr - 4.0Ni

[国外标准] SAE AMS 4962A-2003 Titanium Alloy, Investment Castings, 6 Al - 4 V Hot Isostatically Pressed

[国外标准] SAE AMS 4336A-2003 Aluminum Alloy, Extruded Rod, Bar, and Profiles (7055-T76511) 8.0Zn - 2.3Cu - 2.0

[国外标准] SAE AMS 4327-2003 Aluminum Alloy, Plate (2098-O)3.5Cu - 1.1Li - 0.50Mg - 0.40Ag - 0.11Zr Annealed

[国外标准] SAE AMS 4173E-2003 Aluminum Alloy, Extrusions 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T6511) Solution