2006资源列表

[国外标准] SAE J101-2006 Hydraulic Wheel Cylinders for Automotive Drum Brakes

[国外标准] SAE AS 23190-A2-2006 Straps, Clamps, and Mounting Hardware, Plastic and Metal for Cable Harness Tyin

[国外标准] SAE AMS-QQ-A-250-9A-2006 Aluminum Alloy 5456, Plate and Sheet

[国外标准] SAE AMS 6417F-2006 Steel, Bars, Forgings, and Tubing 1.6Si - 0.82Cr - 1.8Ni - 0.40Mo - 0.08V (0.38 -

[国外标准] SAE AMS 5732J-2006 Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings 15Cr

[国外标准] SAE AMS 5398F-2006 Steel, Corrosion Resistant, Sand and Centrifugal Castings 16Cr 4.1Ni 0.22(Cb ﹢ Ta

[国外标准] SAE AMS 5225E-2006 Iron-Nickel Alloy, Strip 49Fe - 5.3Cr - 42Ni - 2.5Ti - 0.55Al Solution Heat Treat

[国外标准] SAE AMS 5221E-2006 Iron-Nickel Alloy Strip 49Fe - 5.3Cr - 42Ni - 2.5Ti - 0.55Al Solution Heat Treate

[国外标准] SAE AMS 5010K-2006 Steel Bars Free Machining Cold Drawn (SAE 1212 or SAE 1215) UNS G12120

[国外标准] SAE AMS 4944G-2006 Titanium Alloy Tubing. Seamless. Hydraulic 3.0Al-2.5V Cold Worked. Stress Relieve

[国外标准] SAE AMS 4942E-2006 Titanium Tubing, Seamless Annealed, 40.0 ksi (275 MPa) Yield Strength

[国外标准] SAE AMS 4921K-2006 Titanium Bars, Wire, Forgings, and Rings Commercially Pure 70 ksi (483 MPa) Yield

[国外标准] SAE AMS 4405-2006 Aluminum Alloy, Alclad Sheet (6156-T4) 1.0Si - 0.90Cu - 0.60Mn - 0.90Mg Solution H

[国外标准] SAE AMS 4382D-2006 Magnesium Alloy, Plate, Extra Flat 3.0Al – 1.0Zn – 0.20Mn (AZ31B-0) Annealed

[国外标准] SAE AMS 4341E-2006 Aluminum Alloy, Extrusions 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T73511)Solution H

[国外标准] SAE AMS 4337A-2006 Aluminum Alloy, Extruded Profiles (7055-T77511) 8.0Zn 2.3Cu 2.0Mg 0.16Zr Solution

[国外标准] SAE AMS 4329A-2006 Aluminum Alloy, Plate (7085-T7651)7.5Zn - 1.6Cu - 1.5Mg - 0.12Zr Solution Heat Tr

[国外标准] SAE AMS 4328A-2006 Aluminum Alloy, Plate (2397-T87)2.8Cu - 1.4Li - 0.30Mn - 0.12Zr - 0.10Zn Solution

[国外标准] SAE AMS 4279B-2006 Aluminum Alloy, Alclad Sheet 4.4Cu 1.5Mg 0.60Mn (2024-T4 Flat Sheet) Solution Hea

[国外标准] SAE AMS 4206A-2006 Aluminum Alloy, Plate (7055-T7751) 8.0Zn - 2.3Cu - 2.0Mg - 0.16Zr Solution Heat T

[国外标准] SAE AMS 3644G-2006 Polyimide, Molded Rod, Bar, and Tube, Plaque, and Formed Parts

[国外标准] SAE AMS 2759-7A-2006 Carburizing and Heat Treatment of Carburizing Grade Steel Parts

[国外标准] SAE AMS 2482C-2006 Hard Coating Treatment of Aluminum Alloys Teflon-Impregnated or Codeposited

[国外标准] SAE AMS 2269F-2006 Chemical Check Analysis Limits Nickel, Nickel Alloys, and Cobalt Alloys

[国外标准] SAE AMS 2252D-2006 Tolerances Low-Alloy Steel Sheet, Strip, and Plate