[国外标准] EN 13483-2005 Rubber and plastic hoses and hose assemblies with internal vapour recovery for measure

14.06 MB2020-11-30

[国外标准] EN 10080-2005 Steel for the reinforcemEN t of concrete - Weldable reinforcing steel - GEN eral

728.3 KB2020-11-30

[国外标准] SAE J933-2005 Mechanical and Quality Requirements for Tapping Screws

132.8 KB2020-11-30

[国外标准] SAE J595-2005 Directional Flashing Optical Warning Devices for Authorized Emergency, Maintenance, an

149.96 KB2020-11-30

[国外标准] SAE J577-2005 Vibration Test Machine and Operation Procedure

1.61 MB2020-11-30

[国外标准] SAE J4004-2005 Positioning the H-Point Design Tool Seating Reference Point and Seat Track Length

2.45 MB2020-11-30

[国外标准] SAE J4003-2005 H-Point Machine (HPM-II)~Procedure for H-Point Determination~Benchmarking Vehicle Sea

3.21 MB2020-11-30

[国外标准] SAE J2414-2005 Application Testing of Oil-to-Water Oil Coolers for Heat Transfer Performance

1.09 MB2020-11-30

[国外标准] SAE J2192-2005 RECOMMENDED TESTING METHODS FOR PHYSICAL PROTECTION OF WIRING HARNESSES

209.96 KB2020-11-30

[国外标准] SAE J200-2005 Classification System for Rubber Materials

311.97 KB2020-11-30

[国外标准] SAE J1939-2005 (R) Recommended Practice for a Serial Control and Communications Vehicle Network

3.78 MB2020-11-30

[国外标准] SAE J1796-2005 Spectral Transmission Test

291.19 KB2020-11-30

[国外标准] SAE J1698-2005 Vehicle Event Data Interface~Vehicular Output Data Definition

150.36 KB2020-11-30

[国外标准] SAE J1698-1-2005 Vehicle Event Data Interface~Output Data Definition

766.16 KB2020-11-30

[国外标准] SAE J1545-2005 Instrumental Color Difference Measurement for Exterior Finishes,Texiles and Colored T

472.49 KB2020-11-30

[国外标准] SAE J1127-2005 Low Voltage Battery Cable

133.63 KB2020-11-30

[国外标准] SAE AS 4059E-2005 Aerospace Fluid Power - Cleanliness Classification for Hydraulic Fluids

432.94 KB2020-11-30

[国外标准] SAE AMS STD 2154-2005 Inspection, Ultrasonic, Wrought Metals, Process For

502.74 KB2020-11-30

[国外标准] SAE AMS 5391F-2005 Nickel Alloy, Corrosion and Heat Resistant, Investment Castings, 73Ni 13Cr 4.5Mo

3.81 MB2020-11-30

[国外标准] SAE AMS 5390E-2005 Nickel Alloy, Corrosion and Heat Resistant, Investment Castings, 47.5Ni 22Cr 1.5C

152.74 KB2020-11-30

[国外标准] SAE AMS 4775H-2005 Nickel Alloy, Brazing Filler Metal 73Ni - 0.75C - 4.5Si - 14Cr - 3.1B - 4.5Fe 179

222.38 KB2020-11-30

[国外标准] SAE AMS 4640G-2005 Aluminum Bronze, Bars, Rods, Shapes, Tubes, and Forgings 81.5Cu 10.0Al 4.8Ni 3.0F

225.74 KB2020-11-30

[国外标准] SAE AMS 4124D-2005 Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire 5.6Zn - 2.5Mg - 1.6C

135.53 KB2020-11-30

[国外标准] SAE AMS 2759-3D-2005 Heat Treatment Precipitation-Hardening Corrosion-Resistant and Maraging Steel P

113.46 KB2020-11-30

[国外标准] SAE AMS 2759-11-2005 Stress Relief of Steel Parts

87.49 KB2020-11-30